Keywords = ANSYS
Number of Articles: 93

1

Analysis of Approximated Curved Cracks in Homogeneous and Graded Materials

Journal of Engineering
Volume 15, Issue 2, Spring 2009, Page 3777-3792
Hayder Fanoos Neamah

2

ANALYTICAL MODELING OF ECCENTRICALLY LOADED RC COLUMNS CONFINEDWITH FRP

Muthanna Journal of Engineering and Technology(MJET)
Volume 3, Issue 1, Spring 2015, Page 75-89
Nabil M. A. Hussian

3

ANSYS-Based Structural Analysis Study of Elevated Spherical Tank Exposed to Earthquake

Engineering and Technology Journal
Volume 39, Issue 6, Spring 2021, Page 870-883
Mahmoud Saleh Al-Khafaji; Ahlam S. Mohammed; Muna A. Salman

4

Behavior of Composite Steel-Concrete Beam Subjected To Negative Bending

Engineering and Technology Journal
Volume 27, Issue 1, Winter 2009, Page 53-71
Husain M. Husain; Qais Abdul-Majeed; Anas H. Yousifany; Ikbal N. Korkess

5

Behavior of Corbels Strengthened with Carbon Fiber Reinforced Polymers (CFRP) – Numerical Study

Engineering and Technology Journal
Volume 32, Issue 10, Autumn 2014, Page 2394-2407
Sameh Badry Tobeia

6

Behavior of Steel Plate Girders with Web Openings Loaded in Shear

Engineering and Technology Journal
Volume 31, Issue 15, Summer 2013, Page 2982-2996
May J. Hamoodi; Marwa S. Abdul Gabar

7

Buckling behavior of aluminum plate with circular and elliptical shapes of central cutout

Al-Rafidain Engineering Journal (AREJ)
Volume 21, Issue 3, Spring 2013, Page 1-10
Raid H. Matti; Dr. Rafi K. Al-bazzaz

8

COMPARISON BETWEEN SIMULATED AND CALCULATED POWER OF THE SOLAR CHIMNEY WITH BLACK CONCRETE BASE USING ANSYS PROGRAM

Al-Qadisiyah Journal for Engineering Sciences
Volume 3, Issue 3, Summer 2010, Page 348-366
Ahmed F. Kridi; Ali K. Al-Abadi; Ghassan Fadhil M. Hussain

9

Comparison the Values of Stresses for the Mode I Stress Intensity Factor for a Double Edge Cracked Tension (Isotropic & Orthotropic) Plates-eng

Al-Rafidain Engineering Journal (AREJ)
Volume 21, Issue 4, Summer 2013, Page 14-28
Ahmed M. Abdullah

10

COMPUTATION OF HYDRODYNAMIC CHARACTERISTICS OF WATER FLOW IN ELECTRICAL SUBMERSIBLE PUMP

DIYALA JOURNAL OF ENGINEERING SCIENCES
Volume 5, Issue 2, Autumn 2012, Page 37-51
Mohammed K. Abbas; Ali Z. Asker; Samir D Ali

11

Deformation Analysis of Road Embankment Foundation Soil Improved with Fiber Glass

Engineering and Technology Journal
Volume 30, Issue 19, Autumn 2012, Page 3341-3361
Zainab Ahmed Alkaisi; Zena Hadi Alqaissi; Najwa Wasif Jassim

12

Design and Simulation of 11/0.4 kV Distribution Transformer Using ANSYS

Engineering and Technology Journal
Volume 32, Issue 2, Winter 2014, Page 414-438
Thamir M. Abdul Wahhab; Methaq Talib Jabbar

13

Development of Three - Layer Composite Steel - Concrete - Steel Beam Element with Applications

Engineering and Technology Journal
Volume 28, Issue 24, Autumn 2010, Page 6970-6985
Jamal A. Farhan; Hussain M. Hussain

14

Different Techniques for Calculating Apparent and Incremental Inductances using Finite Element Method

Iraqi Journal for Electrical And Electronic Engineering
Volume 11, Issue 2, Autumn 2015, Page 193-201
Amer Mejbel Ali

15

Effct of Hoops and Column Axial Load on Shear Strength of High-Strength Fiber Reinforced Beam-Column Joints

Journal of Engineering
Volume 18, Issue 3, Winter 2012, Page 350-363
Zaid M. Kani; Jamal A. Farhan

16

EFFECT OF DIE SHAPE ON THE TEMPERATURE AND STRESSES DISTRIBUTION IN THE COMPOUND (FORWARD-BACKWARD) EXTRUSION PROCESS

Iraqi journal of mechanical and material engineering
Volume 11, Issue 1, Winter 2011, Page 1-12
Rana Ali Hussien

17

Effect of Dual Reinforcement on Wear Resistance by Aluminum Compacts Reinforce by SiC, Al2O3

Engineering and Technology Journal
Volume 27, Issue 13, Summer 2009, Page 423-429
Mohammed Moanes Ezzaldean Ali; Hanan A. R. Akkar; A. K. M. AL-Shaikhli; Ali K. Shayyish; Muhsin J. Jweeg; Wisam Auday Hussain; Mohammed T. Hussein; Mohammad A. Al-Neami; Farah S. Al-Jabary; Jafar M. Hassan; Ali H. Tarrad; Mohammed N. Abdullah; Ahmed T. Mahdi; Eyad K. Sayhood; Husain M. Husain; Nidaa F. Hassan; Rehab F. Hassan; Akbas E. Ali; Assim H Yousif; Kassim K Abbas; Aqeel M Jary; Shakir A. Salih; Ali T. Jasim; Ammar A. Ali; Hosham Salim; JafarM. Daif; Ali H. Al Aboodi; Ammar S. Dawood; Sarmad A. Abbas; Salah Mahdi Saleh; Roshen T. Ahmed; Aseel B. Al-Zubaidi; Mohammed Y. Hassan; Majid A. Oleiwi; Shaimaa Mahmood Mahdy; Husain M. Husain; Mohammed J. Hamood; Shaima; a Tariq Sakin

18

EFFECT OF STIFFENERS AND THICKNESS OF SHELL ON THE NATURAL FREQUENCIES AND MODE SHAPES OF OBLATE SHELL BY FINITE ELEMENT METHOD

Al-Qadisiyah Journal for Engineering Sciences
Volume 5, Issue 3, Summer 2012, Page 325-340
Kadhim Mijbel Mashloosh; Asma Hassan Ismail; Hani Aziz Ameen

19

Effect of the Number of Horizontal Construction Joints In Reinforced Concrete Beams

Engineering and Technology Journal
Volume 28, Issue 19, Summer 2010, Page 5803-5821
Maha Ghalib Ghaddar; Layla Ali Ghaleb; Qais Abdul-Majeed

20

Effect of Tunneling in Cohesive Soils on Existing Structures

Engineering and Technology Journal
Volume 32, Issue 10, Autumn 2014, Page 2475-2490
Ameer Abdullah Ahmed

21

ELECTROMAGNETIC-THERMAL COUPLED ANALYSIS OF A BRAZING PROCESS BY INDUCTION FURNACE USING FINITE ELEMENT METHOD

Journal of Engineering and Sustainable Development
Volume 21, Issue 1, Winter 2017, Page 13-25
Hashim Thejel; Rabee; Isam Mahmood Abdulbaqi; Mohammad Hameed Khazaal

22

EVALUATION OF FIRE ENDURANCE OF SELF COMPACTED CONCRETE SLAB REINFORCED WITH STEEL FIBER REINFORCEMENT AND STEEL BARS

DIYALA JOURNAL OF ENGINEERING SCIENCES
Volume 5, Issue 1, Spring 2012, Page 25-39
Zena Waleed Abass

23

Evaluation of Transverse Construction Joints of Reinforced Concrete Beams

Engineering and Technology Journal
Volume 28, Issue 14, Summer 2010, Page 4750-4773
Qais Abdul-Majeed

24

Experimental and Finite Element Analysis of Steel-Concrete Composite Beams

Al-Rafidain Engineering Journal (AREJ)
Volume 20, Issue 6, Autumn 2012, Page 154-168
Dr. Suhaib Yahya Kasim Al-Darzi; Inas Mahmood A.H.Al-Juboory

25

Experimental and Finite Element Analysis on Rounded Corners Square Shape Tube Hydroforming Process

Engineering and Technology Journal
Volume 32, Issue 9, Summer 2014, Page 2148-2164
Hani Aziz Ameen; Nahedh Mahmood Ali

26

Experimental and Finite Element Modeling of Self Compacted Reinforced Concrete Beams Strengthened by Bottom Steel Plates

Iraqi Journal of Civil Engineering
Volume 10, Issue 1, Autumn 2016, Page 1-18
Zaydon M. Ali; Jamal A. Farhan

27

Experimental and Modeling Study of Abrasive Wear of Tungsten Carbide Drilling Bit in Wet and Dry Conditions

Journal of Engineering
Volume 20, Issue 3, Winter 2014, Page 51-61
Fathi Al-Shammaa; Amar Hussein Al-Allaq; Mohaimen Habeeb Makki

28

Experimental and Numerical Analysis of Expanded Pipe using Rigid Conical Shape

Journal of Engineering
Volume 24, Issue 8, Autumn 2018, Page 106-119
Ahmed Ibrahim Razooqi

29

Experimental and Numerical Attenuation of Vibration for Delta Wing Using PI Controller

ALNAHRAIN JOURNAL FOR ENGINEERING SCIENCES
Volume 20, Issue 4, Summer 2017, Page 823-831
Ahmed A. Ali; Hussain Y. Mahmood; Mahmood Wael Saeed

30

Experimental and Numerical Investigation of Creep Behavior In Isotropic Composites

Journal of Engineering
Volume 20, Issue 1, Winter 2014, Page 50-62
Mohsin Jaber Jaweej; Mohsin A. Abdulhussein; Bashar kassim Zalzala

31

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF I-SECTION LIGHTWEIGHT CONCRETE DEEP BEAMS STRENGTHENED WITH CFRP FAILING IN SHEAR

Muthanna Journal of Engineering and Technology(MJET)
Volume 3, Issue 1, Spring 2015, Page 46-59
Riadh A. Abass

32

Experimental and Numerical Research on Flow-Induced Vibration in Valves

Al-Khwarizmi Engineering Journal
Volume 13, Issue 2, Spring 2017, Page 28-39
Asmaa Ali Hussein

33

EXPERIMENTAL AND NUMERICAL STUDY OF 6061-T6 AL- ALLOY FATIGUE LIFE USIFRICTION STIR WELDING NG

Iraqi journal of mechanical and material engineering
Volume 18, Issue 2, Autumn 2018, Page 277-295
Ethar Mohamed Mahdi Mubarak

34

EXPERIMENTAL AND NUMERICAL STUDY OF BENDING BEHAVIOR FOR HONEYCOMB SANDWICH PANEL WITH DIFFERENT CORE CONFIGURATIONS

Iraqi journal of mechanical and material engineering
Volume 16, Issue 4, Autumn 2016, Page 315-328
Asst. Prof. Dr. Hani Aziz Ameen; Dr. Kadhim Mijbel Mashloosh; Doaa Fadhel Mohammed

35

Experimental and Numerical Study of the Effects Of Creating Openings in Existing RC Beams and StrengtheningWith CFRP

Engineering and Technology Journal
Volume 30, Issue 15, Summer 2012, Page 2550-2561
Hayder Qais Majeed

36

EXPERIMENTAL AND THEORETICAL EVALUATION FOR EFFECT OF OPENINGS LOCATION ON SHEAR STRENGTH OF RC BEAMS

Journal of Engineering and Sustainable Development
Volume 20, Issue 1, Winter 2016, Page 1-15
Ali Hameed Aziz

37

Experimental and Theoretical Study of Air Flow with Obstruction Through Test Section of Wind Tunnel

Journal of University of Babylon
Volume 24, Issue 1, Winter 2016, Page 144-153
Hayder Kraidy Rashid; Ali Hamza Kadhim Al-Shibany

38

Experimental and Theoretical Study of Air Flow with Obstruction Through Test Section of Wind Tunnel

Journal of University of Babylon
Volume 24, Issue 1, Winter 2016, Page 144-153
Hayder Kraidy Rashid; Ali Hamza Kadhim Al-Shibany

39

Experimental Stress Analysis for Woven Carbon, Glass, and Kevlar Laminate Shells

DIYALA JOURNAL OF ENGINEERING SCIENCES
Volume 11, Issue 4, Autumn 2018, Page 60-66

40

FATIGUE ANALYSIS OF CONNECTING ROD OF INTERNAL COMBUSTION ENGINE MADE FROM ALUMINUM ALLOY – A COMPARISON WITH STEEL AND TITANIUM ALLOY MATERIALS

AL-TAQANI
Volume 27, Issue 4, Summer 2014, Page 0-0
Samir Hashem Ameen

41

FEM-Simulation of Single and Multi Layered Induction Heating Systems

Engineering and Technology Journal
Volume 27, Issue 13, Summer 2009, Page 2245-2262
Mohammed Moanes Ezzaldean Ali; Hanan A. R. Akkar; A. K. M. AL-Shaikhli

42

FINITE ELEMENT ANALYSIS OF BLANK DESIGN OPTIMAL TO PRODUCE A TRIANGLE CUP BY DEEP DRAWING PROCESS

KUFA JOURNAL OF ENGINEERING
Volume 9, Issue 2, Summer 2018, Page 189-200
Shakir M. Aljabiri

43

FINITE ELEMENT ANALYSIS OF DEEP DRAWING AND SPRINGBACK

Al-Qadisiyah Journal for Engineering Sciences
Volume 5, Issue 2, Spring 2012, Page 137-149
Kareem Najm Hussien

44

Finite Element Analysis of Human and Artificial Articular Cartilage

Journal of Engineering
Volume 18, Issue 4, Spring 2012, Page 443-458
Farah Mohammed Reda Abdulateef; Sadiq Jafer Abbass

45

Finite Element Analysis of Single Sided Linear Induction Motor

Engineering and Technology Journal
Volume 28, Issue 15, Summer 2010, Page 5113-5123
Adil H. Ahmad; Mehdi F. Bonneya

46

Finite Element Analysis of Suppression the Vibration of Dish Using Closed Loop Control System

Engineering and Technology Journal
Volume 34, Issue 8, Summer 2016, Page 1499-1513
Nahedh Mahmood Ali

47

Finite Element Analysis of the Boom of Crane Loaded Statically

Engineering and Technology Journal
Volume 31, Issue 9, Spring 2013, Page 1626-1639
Bakr Noori Khudhur

48

Finite Element Analysis Up To Failure Of Composite Concrete – Corrugated Steel Cylindrical Shells

Engineering and Technology Journal
Volume 27, Issue 13, Summer 2009, Page 2339-2351
Ahmed T. Mahdi; Eyad K. Sayhood; Husain M. Husain

49

Finite Element Method for Improving Soft Soil Underneath a Ballast Railway Track

Journal of Engineering and Sustainable Development
Volume 17, Issue 1, Winter 2013, Page 200-218
Saad Farhan; Ali H. Aziz; Ghufraan Mohammed Aboud

50

Improving the Strength of Steel Perforated Plate Girders Loaded in Shear Using CFRP laminates

Engineering and Technology Journal
Volume 33, Issue 9, Autumn 2015, Page 2119-2129
May J. Hamoodi; Waeel Sh.Abdul-Sahib; Ihsan K.Abed

51

Influence of Metal Type on the Deep Drawing Force by Experimental and Finite Element Method

Engineering and Technology Journal
Volume 29, Issue 13, Summer 2011, Page 2601-2608
Moneer H. Al-Saadi; Hani Aziz Ameen; Rawa Hamed M. Al-Kalali

52

Influence of the Butt Joint Design of TIG Welding on the Thermal Stresses

Engineering and Technology Journal
Volume 29, Issue 14, Autumn 2011, Page 2841-2858
Hani Aziz Ameen; Khairia Salman Hassan; Muwafaq Mehdi Salah

53

Investigation of the Behavior for Reinforced Concrete Beam Using Non-Linear Three-Dimensional Finite Elements Model

Engineering and Technology Journal
Volume 29, Issue 10, Summer 2011, Page 1870-1885
Israa Kh. AL-Shimmari; Nagham T.Hamad; Waleed A Waryosh

54

Investigation of Thermal Performance of Finned,Water-PCM,Double Tube Heat Recovery

Journal of Engineering and Sustainable Development
Volume 19, Issue 4, Summer 2015, Page 97-116
Mohammed H. Mahmoud; Maathe A.Theeb; Ali S. Golam

55

MODELING AND MODIFICATION FOR DISTRIBUTION TRANSFORMER (250 KVA, 11/0.416 KV) TO REDUCE THE TOTAL LOSSES

Al-Qadisiyah Journal for Engineering Sciences
Volume 9, Issue 4, Autumn 2016, Page 479-491
Assist. Prof. Ibtisam A. Hasan; Dr. Sahar R. Fafraj; Eng. Azhar K. Azeez

56

Modeling of Induction Heating Systems Using Artificial Neural Networks

IRAQI JOURNAL OF COMPUTERS, COMMUNICATIONS, CONTROL AND SYSTEMS ENGINEERING
Volume 10, Issue 1, Autumn 2010, Page 56-71
Lec. Dr. Mohammed Moanes Ezzaldean Ali; Assist. Prof. Dr. Hanan A. R. Akkar; Prof. Dr. A.K.M. AL-Shaikhli

57

NEW WAVE OF CAD SYSTEMS AND ITS APPLICATION IN DESIGN

Al-Qadisiyah Journal for Engineering Sciences
Volume 4, Issue 3, Summer 2011, Page 207-214
Mahmoud A .Hassan

58

Nonlinear FE analysis of R.C corner joints made by different ratios of tire strips aggregate

AL-MANSOUR JOURNAL
Volume 0, Issue 27, Autumn 2017, Page 73-94
Nura J. Muhammed; Jasim Jarallah Fahad

59

Nonlinear Finite Element Analysis of Concrete Filled Steel Tubes

Journal of University of Babylon
Volume 21, Issue 2, Winter 2013, Page 477-492
Haider M. Abdul Hussein; Ahmed N. Mohammed

60

Nonlinear Finite Element Analysis of Reinforced Concrete Corner Joints Subjected to Opening Moments

Basrah Journal for Engineering Science
Volume 13, Issue 1, Autumn 2013, Page 16-33
Lateef N. Assi; David A. M. Jawad

61

Nonlinear Finite Element Analysis of Reinforced Concrete Cylindrical Shells

Basrah Journal for Engineering Science
Volume 15, Issue 1, Autumn 2015, Page 86-97
David A.M.Jawad

62

Nonlinear Finite Element Analysis of Space Truss

Anbar Journal for Engineering Sciences
Volume 0, Issue 0, Spring 2012, Page 190-204
Ahmed Farhan Kadhum

63

Nonlinear Three-Dimensional Finite Element Analysis of Reinforced Concrete Dapped-End Beams

Iraqi Journal of Civil Engineering
Volume 9, Issue 1, Autumn 2013, Page 1-16
A. Mohammed

64

Non linear Vibration Analysis of liquid Storage Tank

Thi-Qar University Journal for Engineering Sciences
Volume 5, Issue 1, Spring 2014, Page 85-100
Abdulamir A. Karim; Thamer hussein amer

65

Numerically and Theoretically Studying of the Upper Composite Complete Prosthetic Denture

Engineering and Technology Journal
Volume 33, Issue 5, Spring 2015, Page 1023-1037
Sihama I. Salih; Jawad K. Oleiwi; Qahtan A. Hamad

66

Numerical Modal Analysis of Reinforced Concrete Slab with Opening

ALNAHRAIN JOURNAL FOR ENGINEERING SCIENCES
Volume 20, Issue 2, Spring 2017, Page 368-377
Hussam K. Risan; Omar Shamal Farhan; Hiba Imad Abbas

67

Numerical Prediction of Bond-Slip Behavior in Simple Pull-Out Concrete Specimens

Journal of Engineering
Volume 19, Issue 1, Winter 2013, Page 1-12
Ala; a Hussein Alwan Al-Zuhairi; Wjdan Dhaif Sahi Al-Fatlawi

68

Optimum Design of Journal Bearings Dimensions for Rotating Machines

Engineering and Technology Journal
Volume 38, 10A, Autumn 2020, Page 1481-1488
Tariq M. Hammza; Ehab N. Abas; Nassear R. Hmoad

69

Optimum Design of Stiffened Plate-StructureSubjected to Static Loading

Al-Khwarizmi Engineering Journal
Volume 4, Issue 2, Spring 2008, Page 46-58
Mohammed A. Al-Shojary; Dr. Adil A. Al-Moosawy; Dr. Hatem H. Al-Taee

70

Proposed Formulation Using ANSYS for Estimation Axially Strength of Steel Tubes Columns Filled with Concrete

Engineering and Technology Journal
Volume 34, Issue 11, Summer 2016, Page 2057-2071
Marwah S. Abdul Gbabar

71

Punching Shear Resistance of Reinforced Concrete Flat Plate Slabs Strengthened with CFRP

Engineering and Technology Journal
Volume 32, Issue 2, Winter 2014, Page 511-529
Eyad K. Sayhood; Mohammed J.Hamood; Aseel A. Abdul Ridha

72

Seismic Analysis Of Liquid Storage Tanks

Journal of Engineering
Volume 17, Issue 3, Spring 2011, Page 610-619
AbdulMuttalib I. Said; Ammar A. AbdulMajeed

73

Simulation of Turbulent Heat Transfer Augmentation with Hybrid Nanofluid

DIYALA JOURNAL OF ENGINEERING SCIENCES
Volume 11, Issue 4, Autumn 2018, Page 28-34

74

Simulation Study of the Variations in Driving Pressure and Frequency on Microbubbles Contras Agents Behavior.

ALNAHRAIN JOURNAL FOR ENGINEERING SCIENCES
Volume 20, Issue 4, Summer 2017, Page 801-806
Aladdin M. Hasson; Abdulkarim H. Dagher; Bassam T. Mohammad; Jasim A. Harbi; Furat I. Hussein; Laith A. Sabri; Ahmed Waheed Mustafa; Mays Munir Ismael; Ahmed A. Ali; Hussain Y. Mahmood; Mahmood Wael Saeed; Jumaa S. Chiad; Muhammad Safa al-Din Tahir; Shakir M. Mousa; Zaid Adnan Abdel-Rahman; Ahmed Daham Wiheeb; Marwa Majeed Jumaa; Wajdi Sadik Aboud; Dawood Eisa Sachit; Najmuldeen Yousif Mahmood; Sadiq Jafer Abbass; Duha Qais Abd-ul-Amir; Ansam M. Salman; Amal F. Jaffar; Alaa Ayyed Jabur Al-Taie; Miqdam T Chaichan; Raid Saleh Jawad; Rasha M. Hussein; Ali A-M. H. AlAsadi; Ahmed Hikmat Faseeh; Ahmed Hazim Abdulkareem; Abdul Sattar J. M.Hasan; Abdul Kadhim M. H. Hadi; Noora Saleh Ekaab; Samir Ali Amin; Sadeq Hussein Bakhy; Fouad Ali Abdullah; Dr. Abdul-Sahib T. Al-Madhhachi; Dalia Shakir Atwan; Hussain J. Al-Alkawi Electromechanical Eng. Dep; Raad M. Fenjan; Samar K. Abdul-Zahraa; Hazem I. Ali; Ali Hadi Saeed; Laith Khalid Al-Hadithy; Mustafa Mahmood Al-Ani; Fatima N. Jaseem; Mofeed A.L. Jaleel

75

Sphrical Slab with Ferrocement

Engineering and Technology Journal
Volume 29, Issue 13, Summer 2011, Page 2609-2616
a A. Mohammed; Shayma

76

Stability of Al-Hadba minaret a-parametric study

Engineering and Technology Journal
Volume 28, Issue 19, Summer 2010, Page 968-981

77

Steel Fiber Reinforced Self-Compact Concrete Beam under Static Loading Using Finite Elements Method

journal of kerbala university
Volume 14, Issue 1, Winter 2018, Page 372-387
Sura Amoori Abbas

78

STRENGTH AND BEHAVIOR OF COMPOSITE STEEL TUBE CONCRETE BEAM

DIYALA JOURNAL OF ENGINEERING SCIENCES
Volume 8, Issue 2, Spring 2015, Page 163-181
Wissam D. Salman

79

structural response of aflanget bolted join under the effect of various parameters

Al-Rafidain Engineering Journal (AREJ)
Volume 21, Issue 6, Autumn 2013, Page 13-25
saad ahmed younis; rafi khalil albazzaz

80

Study of the Misalignment of the Rotary Kiln Relative to Carrying Roller Center in Cement Factories on the Stress in Bearings

Al-Rafidain Engineering Journal (AREJ)
Volume 19, Issue 3, Spring 2011, Page 22-33
Dr. Sabah. m. j. Ali; Mr. Ahmed M. Abdullah

81

Study on coloring of aluminum alloys by Microplasma oxidation (MPO) technique

Journal of University of Babylon
Volume 20, Issue 1, Spring 2012, Page 293-300
Samir H. Awad

82

Study the Effect of Forming Media on the Hydroforming Process for Copper Tube

Al-Khwarizmi Engineering Journal
Volume 14, Issue 1, Spring 2018, Page 52-66
Rusul AbdulKareem Salman; Hani Aziz Ameen; Kadhim Mijbel Mashloosh

83

Study The Vibration Characteristics of Rotating Shaft with Slant Crack by Using Finite Element method in (ANSYS) Software

Kirkuk University Journal-Scientific Studies
Volume 12, Issue 3, Summer 2017, Page 258-276
Emad kudiyer salh; Dr. Sabah Mohamed Jamel

84

The Effect of Heat Treatment onElastic-PlasticBehaviorand Absorbing Energy for L-shaped Mild Steel Under CompressiveAxialLoad-ENG

Al-Rafidain Engineering Journal (AREJ)
Volume 21, Issue 5, Autumn 2013, Page 115-126
Ayad Arab Ghaidan

85

The Effect of Load Magnitude on Fatigue Life and Thermal Behavior of Notched Fatigue Specimen

Journal of University of Babylon
Volume 26, Issue 1, Winter 2018, Page 306-314
Laith Hussain Al Najar; Luay Sadiq Al-Ansari; Mohammed Wahab Al-Jibory

86

The Effect of the Solution Heat Treatment on the Mechanical Properties of Aluminum-Copper Alloy (2024-T3) Using Rolling Process

Al-Khwarizmi Engineering Journal
Volume 7, Issue 2, Spring 2011, Page 14-21
Khairia Salman Hassan; Asma Hassan Ismail; Hani Aziz Ameen

87

Theoretical and Experimental Investigation of the Effect of the Punch Angle on the Backward Extrusion Process

Journal of University of Babylon
Volume 20, Issue 4, Autumn 2012, Page 1136-1149
Ethar Mohammed Mahdi

88

Thermal Analysis of The laminar Free Convection phenomena in an Air Filled Triangular Cavity with Different Boundary Conditions

Journal of University of Babylon
Volume 20, Issue 1, Winter 2012, Page 206-219
Hameed K. Al Naffiey; Ali A. Al Kayiem; Emad D. Abood; Sata K. A. Ajjam; Ali Hadi Ghawi; Mohammed. H. Shinen; Khalid. I. Ajeel; Fadhil. A. Rasin; Firas Jawad AL-Maliki; Wajeha Abdl Daim; Mohammed A. Hameed; Laith Ali Abdul-Rahaim; Amir Fareed Partu Al-Bakrei; Wathiq N. Hussein; Samir H. Awad; Nawal H. Al; Raheimy; Ahmed Q. AL-Thahab; Abeer M.H.Zwain; Maha M.Misbah Al- Ameen; Wael S. Al-Alousi; Shnawa; I.M.S; AL-A Midi; B.H.H; Mehdi Yagoob; Saba Fadhil Ali; Hider Mahdi Al-Shirifi; Shatha Abdul Kareem; Rasha Hameid Jehad

89

Thermal Analysis of The laminar Free Convection phenomena in an Air Filled Triangular Cavity with Different Boundary Conditions

Journal of University of Babylon
Volume 20, Issue 1, Spring 2012, Page 206-219
Hameed K. Al Naffiey; Ali A. Al Kayiem; Emad D. Abood; Sata K. A. Ajjam; Ali Hadi Ghawi; Laith Ali Abdul-Rahaim; Amir Fareed Partu Al-Bakrei; Wathiq N. Hussein; Samir H. Awad; Nawal H. Al; Raheimy; Ahmed Q. AL-Thahab

90

THE STUDY OF TEMPERATURE DISTRIBUTION ON A CYLINDER OF SUZUKI 250GSX ENGINE FUELED WITH GASOLINE BLENDS USING FINITE ELEMENT ANALYSIS

DIYALA JOURNAL OF ENGINEERING SCIENCES
Volume 7, Issue 2, Spring 2014, Page 145-157
Lutfi Y. Zeidan; Mohammed KH. Abbass; Ali Z. Asker

91

Transient Analysis of Composite Plates with Different Types of Cutout

Anbar Journal for Engineering Sciences
Volume 5, Issue 1, Spring 2012, Page 1-21
Ahmed N.Uwayed; Riyah N.Kiter; Muhsin J.Jweeg

92

ULTIMATE STRENGTH OF CONCRETE CORBELS WITH HYBRID REINFORCEMENT AND STRENGTHENED EXTERNALLY BY CARBON FIBER

Journal of Engineering and Sustainable Development
Volume 21, Issue 1, Winter 2017, Page 89-103
Suaad Khaleel Ibraheem Al-Fadhli

93

Vibration Analysis of Laminated Composite Plate under Thermo-Mechanical Loading

Journal of Engineering
Volume 20, Issue 2, Winter 2014, Page 118-135
Adnan Naji Jameel; Rasha Mohammed Hussien